Here's how it works:
The YS-1325 CNC Systems furniture produce line automatically loads a 4x8 sheet from a pallet by way of a scissor lift located at the rear of the CNC machine. A movable gantry system equipped with suction cups using retractable guide rails and stops on the table safely and accurately guides the material sheet onto the CNC platform. Once the sheet is placed, the operator turns on the vacuum hold down and starts the cut cycle for the CNC to execute. After the sheet is fully processed, it is then pushed off to a conveyor table at the front end while another sheet is simultaneously loaded from the rear of the machine again. During this whole process the residual dust or chips that are not picked up from the dust collector are swept off the table and conveyor into various chutes keeping the work cell clear of dust and debris. Upon completion, the individual parts are labeled by the operator through an integrated barcode system. This facilitates clear identification of the finished parts for quick and easy assembly later on.
automatic upload and unload processing center
4 ft x 8 ft
Loading and Unloading Speed
X/Y helical rack and pinion drive, Z ball screw drive
24 months for the whole machine.
Within 24 months under normal use and maintenance, if something is wrong with the machine, you will get spare part for free.
Out of 24 months, you will get spare parts at cost price. You will also get technical support and service all the lifetime.
1, Technical support by phone, email or MSN/Skype around the clock
2, Friendly English version manual and operation video CD disk
3, Engineer available to service machinery overseas
After sales services:
Normal machine is properly adjusted before dispatch. You will be able to use the mchines immediately.
You will be able to get free training advice towards our machine in our factory. You will also get free suggestion and consultation, technical support and service by email/fax/tel and lifetime technical support.
1. Are you a factory or trading company?
We are the manufacturer and we have 10 years factory experience. As only the machine made by ourself, quality can be trusted, and most important thing is we can do better service after sales. we know how to fix the problem in each parts easliy. so welcome to visit our factory
2. How long is the delivery time?
For standard machines, it would be 7-10 days; For non-standard machines and customized machines according to client's specific requirements, it would be 15 to 30 days.
3. How should I pay for my order? what is the procession of this purchase?
You can do 30% prepayment at first, then we will start to make production. when the machine is ready, we will take pictures to you, and then you can do the ballance.
after we got your payment. We will send the machine to you.
4. How about your service after sales? can your engineer speak fluent english?
We offer the service from you got the machine, including how to install the machine, how to use machine. how to let machine work. and so on. Usually we will teach you how to do by email or by skype. our engineer has many years of experience for cnc machine service. he can speak very good english, so he can slove the problem in short time.