For semi-automatic HQ 3000S, there are some functions: Gluing, fine trimming, scraping, buffing.
We usually use wood type: MDF, Block Board, Solid Wood Board, Particleboard, Door Plates, Plywood Etc.
1, Product Show
Min.Width of panel
Min. Length of panel
Max.size of tape higher than panel(each side )
Panel feeding speed
380V 3N/PE 50Hz Can be customzied
Panel feeding motor
Glue axis motor
3kw*2 200Hz 12000r/min
Fine trimming motor
0.5kw*2 200Hz 12000r/min
0.25kw*2 50Hz 2800r/min
Heating power of glue tank
Secondary heating power
Glue temperature fo readging (reference)
1.The center console of the edge banding machine adopts a one-button operation button, green means open, red means closed, temperature controller system, convenient temperature adjustment.
2.Through the special structure, the edge-sealing sheet and the edge-sealing material are evenly coated to ensure a firmer adhesion.
3.The edge band and the plate are pressed tightly, so that the edge banding is more firmly attached, and the electronic time control belt is fed and cut in the stroke to make the length more accurate.
4.Using the automatic tracking of the master and the high-frequency high-speed motor structure, repairing the excess edge-sealing material above and below the edge band of the plate to ensure the smoothness of the upper and lower parts of the plate.
5.The scraping edge is used to eliminate the ripple marks caused by the cutting process of the trimming non-linear motion, so that the upper and lower parts of the plate are smoother and more tidy, and the hand feel is good.
6.The use of double slot, slotting depth can reach 2-4 male slot position adjustable, high precision. Equipped with two large 4kw motors, it is powered enough.
7.Polishing is used to eliminate the ripple marks caused by the cutting process of trimming non-linear motion, so that the upper and lower parts of the board are smoother and more tidy, and the hand feel is good.
1,can you offer good price with fine quality also?
Surely,if without quality,we cannot win long market.we will loose long-terms customers.Quality is our responsibility.we must produce and test machine well.Becasue we are always expecing long term business.Regarding the price.
we are not sure if it is lowest or highest,But we will be offering reasonble.We don’t want heavy profits,we want a acceptable price to you,and we are expecting a bigger quantities of sales for different wood machines
2,We will be protetcted if we are paying for orders?
Surely yes,we have been exported 1000000$ different wood machine every year,We received the payment,we should produce for you and ship to you without delay. It is honesty and reputy.We could understand that you paid,you want to see machines soon and use soon. and these years alibaba trade assurance you could rely on,you will be protected very well.
3, What's your warranty? can you do more service for us? we wish woud be protected after purchasing machine.
We are pleased to give life continious aftersales service. within 12 months, if spareparts broken,we will send you new for change. we would like to help to solve any troubles when you use machine at any time.and don’t be worried,we will keep opening 24 hours for all customers problem or difficilaty. we must help to make solutions within 48 hours .
4, What's your production time? we want faster shipping time also.
mostly machine we have in stock, some machine we produce need about 7-10days. make fast shipment always. shipping time depends on shipping company.